Glass

There is nothing nicer than having sparkling clean glass in the bathroom. Cleaning your bathroom glass is an art. Making sure that your bathroom glass stays clean and stain free is virtually necessity and can also augment their durability. Cleaning bathroom glass is something that we all have to do; after all it adds elegance and imparts a healthy environment to your bathroom.

Whether you try to look out of the window, use your mirror while doing your hair, have clear shower glass or simply want the bathroom to look nice – it is always the bathroom glass that needs to be cleaned! Unfortunately, not many attain a stain free glass no matter how much they try to clean them.

There are more solutions to glass cleaning tips than just using:

• Alcohol
• Dishwashing detergent
• Scouring pad
• Vinegar
• Oven cleaner

They definitely make a great substitute for cleaning your glass, but here are some glass cleaning tips that not many people have heard about!

• General glass cleaning: mix 1/3 white vinegar and 2/3 water and use this as your bathroom cleaner on tiles and glass. Vinegar is a natural disinfectant and does wonders with removing oils and soap scum.

But for more difficult glass stains, here are some products to consider:

• Nail polish remover: nail polish remover is basically acetone, which works great for your bathroom glass. However, this should not be used on the whole glass but only on spots that are hard to remove. Before applying this great cleaning solution, it must be ensured that the area is well ventilated and can dry up the remover easily. It is always important that you first try them on inconspicuous spots, because chances are that most glasses come with a coating and such glasses may show some kind of reactions. Also, be sure that you do not use a plastic scouring pad since it might melt and stick to your glass.
• CLR: CLR is actually a blend of rust remover and calcium-lime. This product is readily available in home improvement, departmental and hardware stores. This can be diluted with 50 percentage of water and applied directly on the spots. Make sure to wear rubber gloves and do not inhale any of the cleaner.
• Pencil eraser: you could also use your old pencil eraser or even a sharp razor blade to take off stains from your glass. When you are using a pencil eraser, all you need to do is to rub on the spot as normal but remember not to stress too hard. And if you are using a razor, you can scrape off the dirt at a 30° angle without applying much pressure. Remember you do not want to cut the glass. Both of these products can scratch, but they are excellent if used as described.

The Best Stained Glass Tips- Top 11 Stained Glass Soldering Tips

As a beginner, it will always be very frustrating to create your 1st stained glass piece. Be prepared to ruin a few pieces before you reach a more advanced level. In order to make this road easier for you, I have written this article. This article aims to provide some of the best tips that are required in order to create quality glass products. These tips were first tested and improved by the experts in the stained glass industry. You can be sure that the content of this article will be of superior quality. I have also compiled these tips from different resources and stained glass enthusiasts that accepted to share their knowledge with me.

The first and most important thing that you need to understand before beginning to make your glass products is that you will fail on your first tries. In order to reach a certain level you must practice, practice, practice. Practice makes perfect. Start practicing on pure scrap glass at first. You can exercise your breaking and cutting techniques easily in this case. You can get the scrap glass from just about any local hardware store. The majority of these hardware stores will also give the stained glass for free to anyone that asks.

The second tip is to cut as precisely as you possibly can. By cutting accurately you will be able to save quite a bit of time and glass. You can save a lot of glass by doing precise cuts, keep this in mind. By saving glass you will also have more material for you to practice on and improve your skills. Like we discussed in the first step, it’s all about practice.

The third important tip is to learn to properly use the grozier pliers. Properly using the grozier pliers is a very important skill that you need to have if you are serious about working with stained glass. These pliers are also highly useful. Once you master them you will be quite astonished at what you can use them for.

When working with that kind of glass, be sure to wear the proper safety gear. This is a very important step because accidents can be very upsetting. I highly recommend that you protect your eyes because flying glass can do serious damage to them. The rest of your body should also be well protected, keep this in mind when you are going to work with stained glass.

Top 11 Stained Glass Soldering Tips – Learn How to Solder Glass Art

We have boiled down our top 11 stained glass soldering tips to help you master the art and learn how to solder glass art.

This is one of the most crucial steps in the process and can truly make a difference in your stained glass projects.

So why do we use solder? Solder is a combination of tin and lead used to create a strong bond between other metals. Solder doesn’t stick to the glass pieces, so we apply copper foil tape to the edges, which is where you get the copper foil method. We melt the solder over the copper foil that holds the pieces together.

These tips are going to cover the copper foil method, but you will also utilize solder with the lead came method as well.

1. Safety: One of the most important aspect of soldering any stained glass project is to take the proper measures to safeguard your health. Soldering involves working with potentially hazardous materials like lead, flux and harmful fumes. By observing specific safety precautions and using informed common sense, working in stained glass can be a safe and enjoyable past time. Ventilation, wearing glasses, and securing the glass pieces are a few additional tips.

2. Choosing your soldering iron: There is a lot to consider when you choose an iron for stained glass. The handle should be heat resistant and comfortable for you to hold. You may be holding it for several hours at a time, so consider the weight and balance of the iron. Wattage is an important aspect of the iron you choose. It must be able to continuously generate enough heat to melt all of the types of solder you plan to work with. We recommend an iron that is at least 60 watts with a way to control the temperature.

3. Iron and tips maintenance: Investing in a soldering iron is a big step in whether you take this art seriously or not. A well maintained soldering iron and tips perform better and make the job of soldering much easier. Consider buying a soldering iron stand to keep your iron working at its best.

4. Do I need flux? Flux is a chemical compound that is used to promote the bonding of metals by removing the oxide residue simultaneously with the soldering process. Because of oxidation and other matters, it’s important to use flux in the bonding process as each mix of metals being used has a specific flux.

5. Before you begin: Make sure the foil is seated properly over the glass, trim all overlaps, put together all tools needed for the project, and secure your glass pieces. Not to mention review the safety measures.

6. Make sure you clean the surface you are about to solder. Steel wool is the best way to clean the surface of copper foil

7. Getting started: Flux all intersections first, then use a small amount of solder and flatten with the iron tip. Next fill in the gaps between the glass pieces until the solder is level with the surface of the glass. Then, coat the surface with a thin layer of solder. Finally, use your flux. We like to start at the top and work down as it tends to turn out better.

8. Running the solder bead: The best way we have found to run the bead is to hold the iron like a cutting knife and utilize your writing hand. If you run into a problem, just let the solder cool, then re-solder the joint applying more solder.

9. Fixing imperfections: If you apply too little add more. If you apply too much, then clean your iron tip and move the flat part across the seam. This will pull the excess solder easily. The key when soldering is to work slowly, but not too slowly causing heat fractures and melted solder.

10. Finishing: We use a finishing wax to make sure the solder is looking its best. Carnuba wax is one example that will work.

11. Practice: Utilizing stained glass soldering ebooks, courses, and videos and try different techniques. What works for one artist may not work as well for another. Find what fits your style.

Artist, this is just a start, but these are our top stained glass soldering tips. Yes, these get more in depth, but provide an overlay to the proces In closing on glass cleaning tips, you might want to remember a few points. First of all, you should be sure that you are not using gasoline to clean your bathroom glass. In spite of this being a known fact many people tend to use gasoline while cleaning glass. Try not to use caustic cleaners on glass because they will scratch it. When trying to remove any stain from glass, do it w Kaye Dennan has employed cleaners in her businesses for over 25 years and knows the value of a house cleaning schedule. Find out how to clean quickly, efficiently and effectively. Visit http://www.guidetospeedcleaning.com for more valuable cleaning tips.

Article Source: http://EzineArticles.com/?expert=Kaye_Dennanith care. If you are unsure just try it on a little corner of the glass first and see what the result is.

You can learn more about soldering at CreateStainedGlass.com’s stained glass solder video section or discover other tips of the stained glass making process with quality stained glass videos!

To find out more information about stained glass panels, please visit Peter Sibierski’s most comprehensive online guide on stained glass supplies to get the best offers, read reviews, learn facts and check where to shop.

Article Source: http://EzineArticles.com/?expert=Peter_Sibie

Article Source: http://EzineArticles.com/?expert=Joe_Collinsworth

Now that you have taken the time to read this post, why not take the time and read my many other posts, am sure you will find what you need.